Chemical mortar CM400PE

Click Here to see Load Charts
Click here to see Approvals

Description

The CM400PE is a high performance high strength premium grade solvent free pure epoxy based chemical injection anchoring system for heavy duty structural applications. The dual cartridge format comprises of a resin and hardening agent in separate external compartments which are mixed to the correct proportions in the delivery nozzle when triggered using the required manual dispenser. It’s non shrink, non sag and extended cure time formula make this resin the ideal choice for large diameter, deep and oversized drill holes with variable embedment depths and is also suitable for underwater use and in submerged drill holes.

Advantages

• Premium grade resin for applications requiring high load values
• One of the strongest injection systems in the market especially suitable for big diameter rebar and rods
• No expansion forces in concrete allow for secure applications even close to the edges and reduced anchor center xing.
• Ideal solution for diamond drilled holes and wet bore holes - can be used in all weather conditions
• Low sensitivity to oversized, wet holes due to negligible shrinkage and adhesive property thus less risk of installation failure.
• Long working time, therefore always enough time for aligning work and installation of big diameters at deep embedment.
• Easy setting in a wide range of temperature and long working time even at elevated temperature.
• Dispensing system reduces the possibility of contact making it safer to use.
• Bonds almost any material (except rubber or exible pvc).
• Solvent free low odor recipe for convenient working also indoors.
• Vibration resistant.
• Corrosion resistant.

Advice

CM400PE is metered system and is designed to pump at an optimal ow rate, therefore once the material has started to extrude from the nozzle, over triggering the manual dispenser will not signicantly increase the ow rate and may cause leakage from rear of the cartridge.

Suitable For :

• Static and dynamic loads.
• Structural connections transferring high loads into columns, beams, concrete pads and sections.
• Holding down bolts for steel columns and assemblies.
• Mining and tunneling substrate stabilisation and formwork support.
• Grouting and bonding of rebar, starter bars and dowels.
• Holding down machinery, fans and motors.
• Anchoring racking systems.
• Safety barriers and moveable structural steel assemblies.

Base materials

Recommended for use in reinforced and non-reinforced concrete, rock and stone.

Application

As a pure epoxy resin, CM400PE oers excellent adhesion to both steel and concrete and has highest load values of all our systems, it is primarily designed for heavy duty bonding of rebar, starter bars and dowels, anchor studs, bolts, threaded bars and sockets.

Back